Home > Showroom > China Long Shaft Sump Vertical Slurry Pump
China Long Shaft Sump Vertical Slurry Pump
  • China Long Shaft Sump Vertical Slurry PumpChina Long Shaft Sump Vertical Slurry Pump
  • China Long Shaft Sump Vertical Slurry PumpChina Long Shaft Sump Vertical Slurry Pump
  • China Long Shaft Sump Vertical Slurry PumpChina Long Shaft Sump Vertical Slurry Pump

China Long Shaft Sump Vertical Slurry Pump

China Long Shaft Sump Vertical Slurry Pump is widely used in environmental protection, municipal engineering, thermal power plant, gas coking plant, refinery, steel plant, mining, paper industry, cement plant and food plant. It can also be used for pumping thick liquid, heavy oil, oil residue, dirty liquid, mud, mortar, quicksand and the flowing sludge of urban sewage ditch, as well as the fluid containing mud, sand and slag and corrosive liquid.

Send Inquiry

Product Description

China China Long Shaft Sump Vertical Slurry Pump Manufacturers and Suppliers

1.Summary of China Long Shaft Sump Vertical Slurry Pump
Sp (R) submerged pump is a Long Shaft Sump Vertical centrifugal Slurry Pump, which is suitable for conveying abrasive or corrosive slurry. The pump is usually immersed in the tank or pit. The submerged pump is divided into SP type and SPR type, with the same structure. The flow passage parts and shafts of SP type are made of metal materials, which are suitable for conveying abrasive slurry. SPR type flow passage parts are lined with corrosion-resistant rubber, which is suitable for conveying corrosive slag slurry. Sp (R) submerged pump is widely used in metallurgy, mining, coal, electric power, building materials and other departments.

China Long Shaft Sump Vertical Slurry Pump


2.Structure Description of China Long Shaft Sump Vertical Slurry Pump

China Long Shaft Sump Vertical Slurry Pump

Heavy duty mining process. Heavy refuse removal. Cyclone feedsFlowrate 3 - 1500l/sThe China Long Shaft Sump Vertical Slurry Pump body, impeller and guard plate of SP submerged pump are made of wear-resistant materials. The structure is simple and the installation is convenient. The pump body is fixed on the bracket with bolts. The bearing body is placed on the upper end of the bracket. The double row tapered roller bearing is used at the pump end of the bearing body, and the single row cylindrical roller bearing is used at the drive end, which can bear the maximum axial load of the pump. The bearing body is equipped with motor seat or motor bracket, which can adopt direct drive or V-belt drive, and the grooved wheel can be easily replaced to change the speed of the pump, so as to meet the change of working conditions or the performance of the pump after wear. The bracket is equipped with a pair of developed mounting plates, which can be conveniently mounted on the steel frame foundation or concrete foundation. The pump should be immersed in the slag slurry tank to work. The suction port of the pump body is equipped with a filter screen, which can prevent large particles from entering the pump.

The structure of SP type pump is exactly the same as that of SP type pump. The only difference is that the parts immersed in slag slurry are lined with corrosion-resistant rubber. The rubber lined parts include shaft, pump body, impeller, guard plate and filter screen. The connecting bolts of submerged part are equipped with rubber protective sleeve. The parts of transmission part are exactly the same as that of SP type pump.

Operating Speed 200-3800RPM


3.Assembly Precautions of China Long Shaft Sump Vertical Slurry Pump
1. Bearing assembly
When assembling the bearing, the bearing assembly should be preheated, and the temperature should not exceed 120 ℃. The lower bearing adopts double row tapered roller bearing. Its inner ring, outer ring and positioning sleeve are complete sets of components, and are not allowed to be interchanged with corresponding parts of the same kind of bearing. When installing the lower end cover of the bearing, the lip surface of the lip seal ring in the groove of the lower end cover should be outward, The oil slinger must be in accordance with the position in the assembly drawing. When installing the labyrinth ring, the opening of the labyrinth ring should be staggered in the diameter direction. Although the bearing itself has guaranteed the axial clearance, so the bearing assembly of the submerged pump does not need high-speed clearance in the assembly, but after the assembly, it is recommended to check the installed end clearance according to the values listed in the table below.

2. Installation of bracket, mounting plate and pump body
Connect the bearing assembly with the bracket with bolts, install a split mounting plate on the circumference of the bracket, fix it on the bracket with double head bolts, and then install the rear guard plate, impeller and pump body. When assembling, pay attention to the relative position between the bearing body, bracket, mounting plate and pump body, which must conform to the figure below, so as to ensure the relative position of water outlet pipe and oil nozzle


4.Technical Data of China Long Shaft Sump Vertical Slurry Pump

China Long Shaft Sump Vertical Slurry Pump

5.Success Cases of China Long Shaft Sump Vertical Slurry Pump

China Long Shaft Sump Vertical Slurry Pump

6.Welcome to Contact Us

Email: [email protected]
WA:+8618132711119

China Long Shaft Sump Vertical Slurry Pump



Hot Tags: China Long Shaft Sump Vertical Slurry Pump

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.