Overhaul Items and Maintenance of Heavy Duty Slurry Pump.Check the wear depth of the shaft hole. If the wear depth is less than 4mm in the diameter direction (i.e. less than 2mm in the radius direction), the position to be repaired shall be polished and deepened with an electric tool.
Latest Selling China Overhaul items and maintenance of heavy duty slurry pump Manufacturers
So as to give you ease and enlarge our company, we also have inspectors in QC Team and assure you our greatest support and product or service for Ordinary Discount China Overhaul Items and Maintenance of Heavy Duty Slurry Pump Heavy Duty Heavy Duty Slurry Pump, Now we have four leading products and solutions. Our items are very best sold not only during the Chinese current market, but also welcomed inside the international sector.
Ordinary Discount China Psc Motor Pump, 3/8HP Water Pump, Our mission is to deliver consistently superior value to our customers and their clients. This commitment permeates everything we do, driving us to continuously develop and improve our products and the processes to fulfill your needs.
1. Wear detection for heavy duty slurry pump?
Check the wear depth of the shaft hole. If the wear depth is less than 4mm in the diameter direction (i.e. less than 2mm in the radius direction), the position to be repaired shall be polished and deepened with an electric tool. Note: the surface should not be polished too much. The coarser the better.
2. Repair wear for heavy duty slurry pump
Wipe off the extruded repair agent. Remind again: when pushing the bearing, ensure that there is no lack of glue at the repair position.
3. Bearing positioning for heavy duty slurry pump
a. The simplest way is to assemble the shaft and bearing with glue, and keep it at this position until the repair agent solidifies after the accuracy is found.
b. When possible, three-point gasket positioning method or manufacturing fixture can be used for positioning and assembly. It can be put into use after complete curing.
4. Cleaning to be repaired for heavy duty slurry pump
Clean the surface to be repaired of the bearing hole with cleaning agent.
5.Paint mold dope for heavy duty slurry pump
Paint a thin layer of release agent on the outer ring of the bearing to facilitate the disassembly of the bearing in the future.
6. Antifriction repair for heavy duty slurry pump
Prepare antifriction repair agent and apply the repair agent directly to the bearing outer ring, but only to the rear half of the bearing outer ring. The coating amount shall ensure that there is no lack of glue between the bearing outer ring and the shaft hole, and the gap must be filled with repair agent.
6.Please contact us
Should you have any inquiry, please do not hesitate to contact us. Our sales team is ready to supply you with professional technical support.
Email: [email protected]