Heavy Duty Sand Processing Slurry Pump
  • Air ProHeavy Duty Sand Processing Slurry Pump
  • Air ProHeavy Duty Sand Processing Slurry Pump
  • Air ProHeavy Duty Sand Processing Slurry Pump
  • Air ProHeavy Duty Sand Processing Slurry Pump
  • Air ProHeavy Duty Sand Processing Slurry Pump
  • Air ProHeavy Duty Sand Processing Slurry Pump

Heavy Duty Sand Processing Slurry Pump

Heavy duty sand processing slurry pump is a common industrial pump, some customers often encounter some difficult problems during use, this article may help you.

Send Inquiry

Product Description

Five advantages of heavy duty sand processing slurry pump

1. The slurry pump has high working efficiency, reasonable design of lubrication and cooling system, and low operating temperature.

2. The overflow parts of the slurry pump are wear-resistant, have a long service life, require less maintenance, and save production costs.

3. The bearing box of the slurry pump has a reasonable layout, good sealing, and the fluid is not easy to leak.

4. The design of the overflow parts of the slurry pump is reasonable, the disassembly is convenient, energy saving and consumption reduction.

5. The slurry pump runs smoothly, with small vibration, wide flow passage and large flow adjustment range.

Heavy Duty Sand Processing Slurry Pump

Common faults and solutions of heavy duty sand processing slurry pumps

1. The slurry pump cannot be started

Common reasons: the packing is too tight, the impeller is stuck by debris; the pump shaft and bearing are embroidered; the pump shaft is bent.

Solution: Check the power supply first, then loosen the packing and loosen the water diversion tank; disassemble to clean up debris and rust; correct the pump shaft.

2. The heavy duty sand processing slurry pump does not absorb water

Common reasons: there is air in the pump, intake of the suction piping system, intake of the shaft seal.

Solution: Add some exhaust measures, increase the sealing, and ensure the water volume and water pressure at the shaft seal.

Heavy Duty Sand Processing Slurry Pump

3. Bearing overheating

Common reasons: the motor shaft and the pump shaft are not concentric, the elastic pad of the coupling is damaged, the oil is not clean, or the oil chamber enters the slurry.

Solution: Adjust the concentricity of the motor shaft and the pump shaft, replace the elastic pad, change the new oil and prevent the oil chamber from entering the slurry.

4. Vibration and noise

Common causes: Bearing damage, pump evacuation due to insufficient slurry supply, blockage of suction line or impeller.

Solution: Check and replace the bearing, increase the slurry supply or close the outlet valve of the slurry pump, and adjust the characteristics of the pump to match the characteristics of the pipeline.

Heavy Duty Sand Processing Slurry Pump

5. Motor overheating

Common reasons: the voltage is too high or low, the motor is overloaded for a long time, and the motor connection is wrong.

Solution: adjust the voltage, limit the number of starts, select the thermal protection correctly, use the motor according to the upper-scale rating of the motor, and check the connection of the motor.

Heavy Duty Sand Processing Slurry Pump

The use of the slurry pump cannot wait for a fault to be repaired, and attention must be paid to maintenance during normal installation and use. For example, when replacing bearings, you must use regular products and ensure that there is no dust in the bearing components, ensure that the pump components and pipeline systems are installed correctly and smoothly, and adjust the tightness of the packing at any time.

Heavy Duty Sand Processing Slurry Pump

Technical Data of Centrifugal Sand Slurry Pump

Brand Name

DEPUMP

Place of Origin

Hebei, China

Horsepower

10hp-800hp

Pressure

0.5bar-15bar, High Pressure

Cable Length

As customer request

Voltage

380V/400V/415V/460V/1160V

Max Power

15-600kw

Application

Mining/Marine/Washing and cleaning/etc

Power Source

Electric

Structure

Single-stage pump

Outlet size

1-18inch

Theory

Centrifugal pump

Material

High chromium

Color

As customer’s request

Want to know more about pump or need our heavy duty sand processing slurry pump, please feel free to contact our professional engineer below, we will provide best solutions~!

Phone/WA: +86 150 7520 7025

Email: [email protected]

Hot Tags: Heavy Duty Sand Processing Slurry Pump, Manufacturers, Suppliers, Wholesale, Buy, Factory, Customized, In Stock, Bulk, Brands, China, Made in China, Supply, Cheap, Discount, Low Price, Buy Discount, Price, Price List, Quotation, Newest, Quality, Advanced, Latest Selling

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.